Airport Runway Cleaner ARC 1000®
Due to the larger working widths, this airport runway rubber removal machine provides a higher performance than the ARC 1000®.
The more movements (take-offs and landings) take place on a runway, the more rubber deposits (or carbon black deposits) remain on the surface.
These deposits lead to poor friction in the rain and thus increase the risk of aquaplaning extremely. This is to be prevented by an effective cleaning/rubber removal.
Various ARC models, with different processing widths and thus different performances per hour of operation, meet the demand of the rapidly growing market.
The ARC 1000® is a system in which ALL units are driven by the vehicle engine (at least 480 PS).
Design and Performances ARC1600®
01
Max. Working Width
1.600 mm
Note: Lower working width is available by installation of less nozzles in the 2 of 800 mm cleaning heads
02
Max. High Pressure Performance
2.500 / 3.000 bar
03
TANK VOLUME
17 m³
04
Max. Pump Performance
53 l / min
Note: Technical performance limit of the most powerful pump. Other pumps available as per customer request.
05
Speed during operation
3 – 80 m/min (0.18 – 4.80 km/h)
steplessly adjustable
06
Rotation of nozzles
0 – 2.500 rpm
steplessly adjustable
07
Rubber Removal Performance
Low layer removal (up to 2 mm): 2,800 – 3,750 m²/h
Middle layer removal (up to 4 mm): 1,500 – 2,100 m²/h
High layer removal (over 5 mm): 900 – 1,100 m²/h
08
Linear Paint Removal Performance
3,400 – 5,400* linear m/h
* Applicable for 1 layer of paint (standard thickness of 0.8 mm).
09
Thermoplastic Removal Performance
2,700 – 4,600 linear m/h
Thermoplastic spray removal (up to 0.8 mm)
Thermoplastic flat line removal (up to 5 mm)
10
Possible Cleaning Options
9
