Retexturing & Road Line Removal Truck ARC 2400®

Play Video
  • RETEXTURING OF ROAD SURFACES
  • MARKING REMOVAL
  • RUBBER REMOVAL ON RUNWAYS

The ARC 2400® is a compact, easy to maneuver vehicle (6×2 chassis) with an extremely high performance.

In addition to the rear jetting device (3 x 800 mm), side jetting devices with a max. working width of 360 mm can be mounted on one or both sides of the truck. Each cleaning device can be activated or deactivated individually.

The ARC 2400® can be used on runways for rubber removal and on roads for marking removal and/or roughening.

arc 2400 - Landebahn - Runway Solution - from above

DESIGN AND PERFORMANCES ARC 2400®

MAX. WORKING WIDTH

2,400 mm
Note: Lower working width is available by installation of less nozzles in the 3 of 800 mm cleaning heads.

MAX. WATER PRESSURE (operating / technical limit)

2,500 / 3,000 bar

TANK VOLUME (Standard)

17 m³

MAX. PUMP PERFORMANCE

72 l/min
Note: Technical performance limit of the most powerful pump. Other pumps available as per customer request.

SPEED DURING OPERATION

3 – 80 m/min (0.18 – 4.80 km/h)
steplessly adjustable

ROTATION OF NOZZLES

0 – 2,500 rpm
steplessly adjustable

RUBBER REMOVAL PERFORMANCE

Low layer removal (up to 2 mm): 4,600 – 5,700 m² / hour
Middle layer removal (up to 4 mm): 2,200 – 3,200 m² / hour
High layer removal (over 5 mm): 1,200 – 2,100 m² / hour
Note: ARC 2400 is the biggest model for rubber removal.

LINEAR PAINT REMOVAL PERFORMANCE

3,600 – 5,800* linear meters / hour
* Applicable for 1 layer of paint (standard thickness of 0.8 mm).

THERMOPLASTIC REMOVAL PERFORMANCE

3,300 – 5,300 linear meters / hour
Thermoplastic spray removal (up to 0.8 mm)
Thermoplastic flat line removal (up to 5 mm)
Thermoplastic dot line removal (up to 5 mm)

POSSIBLE CLEANING OPTIONS

5

Rear jetting device (3 x 800 mm)
 
Side jetting devices
 

Are you looking for a custom solution? Configure your own truck…

© 2022 SMETS TECHNOLOGY GmbH | Allgemeine Geschäftsbedingungen | Datenschutz | Impressum